IIT 80510 Cut-Off Wheels with Mandrel - 10 Piece Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 31, 2011 20:06:05
Norton NorZon Plus Long Life Small Diameter Reinforced Abrasive Flat Cut-off Wheel, Type 1, Zirconia Alumina, 3/8" Arbor, 4" Diameter x 1/8" Thickness (Pack of 1) Reviews
Norton NorZon Type 1 Plus Long Life wheels are used for small cross-section workpieces, like pipe. The side reinforcement reduces breakage and helps provide straight cuts. Small diameter wheels are intended for use on a horizontal or straight-shaft grinder. Run the grinder at the highest possible speed marked on the wheel.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used for grinding on the periphery, or outside boundary edge, of the wheel and produce a slightly concave surface, called hollow ground, on the workpiece. These wheels can be used for cutting off, tool grinding (between centers or centerless), and removing mold marks and sand from castings, among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Zirconia alumina is a self-sharpening abrasive that allows for a faster cut rate and longer life than aluminum oxide, due to its ability to fracture and refracture, creating new cutting edges. Zirconia alumina is often used for high stock removal on metals and wood.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 30, 2011 10:03:07
Vermont American #28027 7-1/4" Metal Cutt Blade Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 29, 2011 04:23:04
Forney Welding 71875 Metal Grind Whl Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 28, 2011 00:30:03
Ace Portable Circular Saw Cut Off Blade (2079952) Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 27, 2011 02:40:04
Norton Asphalt High Speed Reinforced Abrasive Cut-off Wheel, Type 1, Silicon Carbide, 1" Pin Arbor, 14" Diameter x 3/16" Thickness, Grit 16 (Pack of 1) Reviews
Norton Asphalt Type 1 high-speed reinforced cutoff wheels are suitable for use with high-speed saws. Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped.
Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used for grinding on the periphery, or outside boundary edge, of the wheel and produce a slightly concave surface, called hollow ground, on the workpiece. These wheels can be used for cutting off, tool grinding (between centers or centerless), and removing mold marks and sand from castings, among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Silicon carbide is a sharp, aggressive grain that offers high penetration, fast-cutting, and high material removal even under light pressure. It is commonly used with softer materials like brass, plastics, and rubber, and abrasive materials like glass and enamel, but can wear out faster that aluminum oxide when used on wood.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 25, 2011 17:46:07
Cut Off Wheels - Fiber Disks ST, 2" Dia. - Set of 2 #11-42002 Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 24, 2011 19:17:18
Weiler Brush 36535 Abrasive Wheel Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 23, 2011 23:50:03
Norton Gemini Small Diameter Reinforced Abrasive Flat Cut-off Wheel, Type 01, Aluminum Oxide, 1/4" Arbor, 2" Diameter x 1/16" Thickness (Pack of 5) Reviews
Norton Gemini Type 1 all-purpose wheels have an aluminum oxide formulation to remain free cutting. Run the grinder at the highest possible speed marked on the wheel.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Straight (also called flat) wheels are the most common grinding wheel shape. Straight wheels are used for grinding on the periphery, or outside boundary edge, of the wheel and produce a slightly concave surface, called hollow ground, on the workpiece. These wheels can be used for cutting off, tool grinding (between centers or centerless), and removing mold marks and sand from castings, among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 22, 2011 16:02:08
Abrasive Metal Cutting Wheel 16" x 5/32" x 1"- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, with Gas Powered Saw Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 21, 2011 06:34:06
Norton Gemini Long Life Small Diameter Reinforced Abrasive Flat Cut-off Wheel, Type 01, Aluminum Oxide, 3/8" Arbor, 3" Diameter x 1/16" Thickness (Pack of 5) Reviews
Norton Gemini Type 1 Long Life wheels are used for small cross-section workpieces, like pipe. The side reinforcement reduces breakage and helps provide straight cuts. Small diameter wheels are intended for use on a horizontal or straight-shaft grinder. Run the grinder at the highest possible speed marked on the wheel.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used for grinding on the periphery, or outside boundary edge, of the wheel and produce a slightly concave surface, called hollow ground, on the workpiece. These wheels can be used for cutting off, tool grinding (between centers or centerless), and removing mold marks and sand from castings, among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 19, 2011 17:34:28
Norton Gemini Right Cut Right Angle Grinder Reinforced Abrasive Flat Cut-off Wheel, Type 01, Aluminum Oxide, 7/8" Arbor, 5" Diameter x 3/32" Thickness (Pack of 5) Reviews
Norton Gemini Type 27 right angle grinder wheels are extra thin, for quick cutting action with low kerf loss. Kerf is the material that is lost due to cutting, and is roughly equivalent to the thickness of the wheel. Run the grinder at the highest possible speed marked on the wheel.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Depressed center wheels are flat faced with inset centers and are used for cutting off and portable grinding. The depressed center prevents the tool mandrel from gouging the workpiece. These wheels are typically used on flat workpieces at a slight angle with the workpiece. Depressed center wheels are frequently used with right-angle grinders. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 18, 2011 06:05:04
Metabo 616789000 9-Inch X 1/4-Inch X 7/8-Inch Type 27 Wheels, 10-Pack Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 17, 2011 10:05:38
Norton Gemini Right Cut Right Angle Grinder Reinforced Abrasive Flat Cut-off Wheel, Type 01, Aluminum Oxide, 7/8" Arbor, 7" Diameter x 1/16" Thickness (Pack of 5) Reviews
Norton Gemini Type 27 right angle grinder wheels are extra thin, for quick cutting action with low kerf loss. Kerf is the material that is lost due to cutting, and is roughly equivalent to the thickness of the wheel. Run the grinder at the highest possible speed marked on the wheel.
Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Depressed center wheels are flat faced with inset centers and are used for cutting off and portable grinding. The depressed center prevents the tool mandrel from gouging the workpiece. These wheels are typically used on flat workpieces at a slight angle with the workpiece. Depressed center wheels are frequently used with right-angle grinders. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece.
Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing.
Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.
Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.
Visit Store Now !!
Detail Products
Detail Reviews
Jul 16, 2011 12:19:04
Makita 724603-3 14-Inch Cut-Off Wheels (5-Pack) Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 15, 2011 08:14:04
Ace Portable Circular Saw Cut Off Blade (2079937) Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 13, 2011 07:52:04
Ace Stationary Saw Cut Off Blade (2080307) Reviews
Visit Store Now !!
Detail Products
Detail Reviews
Jul 12, 2011 02:45:06
